Say it in R with "by", "apply" and friends

14 comments
Iris versicolor 
By Danielle Langlois
License: CC-BY-SA
R is a language, as Luis Apiolaza pointed out in his recent post. This is absolutely true, and learning a programming language is not much different from learning a foreign language. It takes time and a lot of practice to be proficient in it. I started using R when I moved to the UK and I wonder, if I have a better understanding of English or R by now.

Languages are full of surprises, in particular for non-native speakers. The other day I learned that there is courtesy and curtsey. Both words sounded very similar to me, but of course created some laughter when I mixed them up in an email.

With languages you can get into habits of using certain words and phrases, but sometimes you see or hear something, which shakes you up again. So did the following two lines in R with me:
f <- function(x) x^2
sapply(1:10, f)
[1]   1   4   9  16  25  36  49  64  81 100
It reminded me of the phrase that everything is a list in R. It showed me again how easily a for loop can be turned into a statement using the apply family of functions and how little I know about all the subtleties of R. I remember how happy I felt, when I finally understood the by function in R. I started to use it all the time, closing my eyes on aggregate and the apply functions family. Here is an example where I calculate the means of the various measurements by species of the famous iris data set using by.

by

do.call("rbind", as.list(
  by(iris, list(Species=iris$Species), function(x){
    y <- subset(x, select= -Species)
    apply(y, 2, mean)
  }
)))

           Sepal.Length Sepal.Width Petal.Length Petal.Width
setosa            5.006       3.428        1.462       0.246
versicolor        5.936       2.770        4.260       1.326
virginica         6.588       2.974        5.552       2.026
Now let's find alternative ways of expressing ourselves, using other words/functions of the R language, such as aggregate, apply, sapply, tapply, data.table, ddply, sqldf, and summaryBy.

aggregate

The aggregate function splits the data into subsets and computes summary statistics for each of them. The output of aggregate is a data.frame, including a column for species.
iris.x <- subset(iris, select= -Species)
iris.s <- subset(iris, select= Species)
aggregate(iris.x, iris.s, mean)

     Species Sepal.Length Sepal.Width Petal.Length Petal.Width
1     setosa        5.006       3.428        1.462       0.246
2 versicolor        5.936       2.770        4.260       1.326
3  virginica        6.588       2.974        5.552       2.026
Addition: As John Christie points out in the comments, aggregate has also a formula interface, which simplifies the call to:
aggregate( . ~ Species, iris, mean)

apply and tapply

The combination of tapply and apply achieves a similar result, but this time the output is a matrix and hence I lose the column with species. The species are now the row names.
apply(iris.x, 2, function(x) tapply(x, iris.s, mean))

           Sepal.Length Sepal.Width Petal.Length Petal.Width
setosa            5.006       3.428        1.462       0.246
versicolor        5.936       2.770        4.260       1.326
virginica         6.588       2.974        5.552       2.026

split and apply

Here I split the data first into subsets for each of the species and calculate then the mean for each column in the subset. The output is a matrix again, but transposed.
sapply(split(iris.x, iris.s), function(x) apply(x, 2, mean))

             setosa versicolor virginica
Sepal.Length  5.006      5.936     6.588
Sepal.Width   3.428      2.770     2.974
Petal.Length  1.462      4.260     5.552
Petal.Width   0.246      1.326     2.026

ddply

Hadley Wickham's plyr package provides tools for splitting, applying and combining data. The function ddply is similar to the by function, but it returns a data.frame instead of a by list and maintains the column for the species.
library(plyr)
ddply(iris, "Species", function(x){
    y <- subset(x, select= -Species)
    apply(y, 2, mean)
  })

     Species Sepal.Length Sepal.Width Petal.Length Petal.Width
1     setosa        5.006       3.428        1.462       0.246
2 versicolor        5.936       2.770        4.260       1.326
3  virginica        6.588       2.974        5.552       2.026
Addition: Sean mentions in the comments an alternative, using the colMeans function, while Andrew reminds us of the reshape package with its functions melt and cast.
ddply(iris, "Species", function(x) colMeans(subset(x, select= -Species)))
## or
ddply(iris, "Species", colwise(mean)) 
## same output as above
library(reshape)
cast(melt(iris, id.vars='Species'),formula=Species ~ variable,mean)
## same output as above

summaryBy

The summaryBy function of the doBy package by Søren Højsgaard and Ulrich Halekoh has a very intuitive interface, using formulas.
library(doBy)
summaryBy(Sepal.Length + Sepal.Width + Petal.Length + Petal.Width ~ Species, data=iris, FUN=mean)

     Species Sepal.Length.mean Sepal.Width.mean Petal.Length.mean Petal.Width.mean
1     setosa             5.006            3.428             1.462            0.246
2 versicolor             5.936            2.770             4.260            1.326
3  virginica             6.588            2.974             5.552            2.026

sqldf

If you are fluent in SQL, then the sqldf package by Gabor Grothendieck might be the one for you.
library(sqldf)
sqldf("select Species, avg(Sepal_Length), avg(Sepal_Width), 
    avg(Petal_Length), avg(Petal_Width) from iris 
    group by Species")

     Species avg(Sepal_Length) avg(Sepal_Width) avg(Petal_Length) avg(Petal_Width)
1     setosa             5.006            3.428             1.462            0.246
2 versicolor             5.936            2.770             4.260            1.326
3  virginica             6.588            2.974             5.552            2.026

data.table

The data.table package by M Dowle, T Short and S Lianoglou is the real rock star to me. It provides an elegant and fast way to complete the task. The statement reads in plain English from right to left: take columns 1 to 4, split them by the factor in column "Species" and calculate on the sub data (.SD) the means.
library(data.table)
iris.dt <- data.table(iris)
iris.dt[,lapply(.SD,mean),by="Species",.SDcols=1:4]

        Species Sepal.Length Sepal.Width Petal.Length Petal.Width
[1,]     setosa        5.006       3.428        1.462       0.246
[2,] versicolor        5.936       2.770        4.260       1.326
[3,]  virginica        6.588       2.974        5.552       2.026

apply

I should mention that R provides the iris data set also in an array form. The third dimension of the iris3 array holds the species information. Therefore I can use the apply function again, I go down the third and then the second dimension to calculate the means.
apply(iris3, c(3,2), mean)

           Sepal L. Sepal W. Petal L. Petal W.
Setosa        5.006    3.428    1.462    0.246
Versicolor    5.936    2.770    4.260    1.326
Virginica     6.588    2.974    5.552    2.026

Conclusion

Many roads lead to Rome, and there are endless ways of explaining how to get there. I only showed a few I know of, and I am curious to hear yours. As a matter of courtesy I should mention the unknownR package by Matthew Dowle. It helps you to discover what you don't know that you don't know in R. Thus, it can help to build your R vocabulary. Of course there is a key difference between R and English. R tells me right away when I make a mistake. Human readers are far more forgiving, but please do point out to me where I made mistakes. I am still hopeful that I can improve, but I need your help.

R code

The R code of the examples is available on github. For more examples on the apply family see also Neil Saunders' post.

14 comments :

gordonsowner said...

I've been trying to collect posts like these for my greater understanding... can you tell me why, in the `by' example, that you need to do `do.call("rbind", ...)' instead of just `rbind(...)'?  I tried the `rbind(...)' way, and I don't get the same result as your way, and your way has it packaged better...

Markus Gesmann said...

do.call allows you to pass the arguments from the outside into the function, so that the function (in this case rbind) is only called once. See also Marc Schwartz comments on R-help: https://stat.ethz.ch/pipermail/r-help/2007-April/129251.html

Danièle Questiaux said...

Thanks!
You certainly show the subtelties of R and when you learn a language ( I am not a native English speaker either), it is great to find different ways of passing on your thoughts, or your questions till you feel happy with your choice.
Thank you!
Questio

Dorothy Bishop said...

Thanks for this very clear account. V. helpful to this beginner.
Taking seriously your comment re English, here are a few pointers:
- Another confusing pair is loose/lose. Loose is adjective = 'not tight'; 'lose' is the verb for misplacing something
- Also of/off "a few I know of"
- unknownR (not unkown)
- "forvigable" is a charming invention, but the correct word is "forgiving"
Having said that, I'd far rather read an article like this with a smattering of English errors than one written by a native English speaker who has no idea how to explain things! Unfortunately, many programmers have no intuitive grasp of what a novice needs to know.

Markus Gesmann said...

Many thanks for your feedback and corrections! 

seancarmody said...

Great overview. I would suggest one minor simplification of the ddply example:

library(plyr)
ddply(iris, "Species", function(x) colMeans(subset(x, select= -Species)))

Olivier Lucas said...

Fantastic! Please do so more often, it was very useful. Also, thanks for pointing out to the unknownR package.

Andrew Royal said...

Hi - great post.  I would probably use the reshape package for this job - you end up with the following oneliner:

cast(melt(iris, id.vars='Species'),formula=Species ~ variable,mean)

cast is a great function - it allows for very complex pivot tables to be formed

jjap said...

Definitely a "keeper". I had given up on the "apply, by and company" in favor of the abstraction allowed by ddply. But this is very good study material to get a grasp of these "traditional" function. sqldf is also a very nice discovery. Many thanks for your post!

John Christie said...

The interface to aggregate is quite a bit more versatile than indicated here.  This is an alternative use.

aggregate( . ~ Species, iris, mean)

I think that's really the simplest way to write this... and one of the fastest executing.  In fact, given that aggregate has a fully formula interface it now completely obviates the summaryBy command.

Markus Gesmann said...

How could I forget this?! It's even part of the examples in the help file to aggregate.
Many thanks for the reminder John!

seancarmody said...

Admittedly not quite as neat as the aggregate example, here's another ddply version:

ddply(iris, "Species", colwise(mean))

maja said...

Thanks for the great tutorials! Can I just ask - maybe it's purely stylistic - but why do you use subset() instead of [ ] indexing? For some reason I am convinced that the bracket notation is the cleaner/safer/purer option, but I can see it must just be a matter of preference?

Anirban Deb said...

Doing the same thing several ways in R was great , you showed what it takes to get a grasp on the language rather than just knowing one way of doing something. But for a beginner, if you could add a small section that explains what is going on, it would have helped in some places. To not distract the rest of the people, perhaps these sections could be mouse over popups, or expandable rows underneath the examples.

Post a Comment